Shutter Release Cables

The shutter release cable connects your camera’s remote port to the SlideSnap’s control panel, so the scanner can focus and fire the camera for every frame.

Every SlideSnap comes with the two most common cables: Canon 2.5mm (C1) and Nikon MC-DC2 (N3). If your camera takes a different one, add it as an option when you order your scanner.

Not sure which one your camera takes? Find your camera in the Camera & Lens Picker: it names the cable for every camera we list. Click a camera below to open it there.

Canon 2.5mm plug

Canon 2.5mm

Same plug as the RS-60E3 remote · Sellers’ code C1
In the box

Cameras: 6D MKII, 80D, 90D, EOS-R, EOS-R6, EOS-R8, EOS-R10, EOS-R50V, EOS-R100, EOS-RP, EOS R6 Mark II, EOS R6 Mark III, EOS R7, EOS R8 Mark II, M5, M6 MKII, SL2, SL3, T6i, T7, T7i, T8i

Older bodies: EOS 60D, 60Da, 650D (T4i), 600D (T3i), 550D (T2i), 500D (T1i), 450D (XSi), 400D (XTi), 350D (XT), 300D, 1100D (T3), 1000D (XS); PowerShot G1 X, G12, G11, G10; Pentax K-5, K-7, K-r, K-x, K20D, K10D, K200D; Contax N Digital; Samsung GX-10

Canon N3 plug

Canon N3

Same plug as the RS-80N3 remote · Sellers’ code C3

Cameras: 5DS, 5DS R, EOS-R5, EOS 5D Mark IV, EOS R5 Mark II

Older bodies: EOS 1D X, 1D C, 1D Mark IV, 1D(s) Mark III, 1D(s) Mark II, 1Ds, 1D, 5D Mark III, 5D Mark II, 5D, 6D, 7D, 50D, 40D, 30D, 20D, 10D

Nikon 10-pin plug

Nikon 10-pin

Same plug as the MC-30 remote · Sellers’ code N1

Cameras: D810, D850

Older bodies: D800, D800E, D700, D300s, D300, D200, D4, D3S, D3X, D3, D2X, D2H, D1X, D1H; Fujifilm S5 Pro, S3 Pro

Nikon 3.5mm plug

Nikon 3.5mm

Same plug as the MC-DC3 remote

A 3.5mm jack like headphones. Plug it into the camera’s remote jack, not the mic jack.

Cameras: Z5 II, Z50 II

Sony Multi plug

Sony Multi

Same plug as the RM-VPR1 remote · Sellers’ code S2

Looks like Micro USB but longer. The one port does charging, the release or USB tethering, one at a time. To fire the camera and tether, use a SnapTether2.

Cameras: A7, A7 II, A7 III, A7 IV, a7R II, A7R III, a7R IV, A7R IVA, A7R V, A5100, A6000, A6100, A6300, A6400, A6500, A6600

Older bodies: A7, A7R, A5000, A5100, A6000, A6300, A3000, NEX-3N, SLT-A58, SLT-A57, RX100 II

Sony USB-C plug

Sony USB-C

The release uses the camera’s only USB-C port, so USB tethering isn’t possible while it’s plugged in. Images save to the card.

Cameras: A7 V, A7C II, A7CR, A6700, ZV-E1, ZV-E10 II

No wired release: Canon EOS-R50, Canon M, Canon M50, Canon M200, Nikon Z30, Nikon Z50, Nikon Zf, Nikon Z fc, Sony A7c, Sony ZV-E10. The scanner can’t fire these cameras.

About the names

We name each cable by the camera’s connector. Most cable sellers use short codes such as C1 and N3 for the same plugs; you’ll find the code on each card above and on the label of the bag your cable ships in. Newer connectors, such as Nikon’s 3.5mm jack, don’t have a code yet.