The shutter release cable connects to your DSLR and to the SlideSnap’s control panel. It allows the control panel to speak with your camera by sending focus / capture commands.
The SlideSnap ships with the two most common shutter release cables; N3 and C1. Refer to the information below to make sure the correct cable is supplied with your unit. This is not an exhaustive list because new camera models are constantly being introduced, refer to your manual or contact us if unsure.
Common Cables
Canon EOS 1100D(Rebel T3), 1000D (Digital Rebel XS), 650D(T4i), 600D(T3i), 550D(T2i), 500D (Digital Rebel T1i), 450D (Digital Rebel XSi), 400D (Digital Rebel Xti), 350D(Digital Rebel XT), 300D (Digital Rebel), 300V, 300, 60D, 60Da, 50E, 50, 33, 30, 3000…etc.
Canon Powershot G12, G11, G10, G1X.
Pentax K200, K110D Super, K110D, K100D, K20D, K10D, K-7, K-5, Kr, Kx, *istDS2, *istDS, *istD, *ist, MZ-6, MZ-L, ZX-L.
Contax N Digital, NX, N1, 645.
Samsung GX-10, GX 1L, GX 1S.
Sony DSC-HX300, DSC-HX50V, DSC-RX100M2, NEX-3NL, SLT-A57, SLT-A58, DSC-RX100M2, NEX-3NL, Alpha a7, Alpha 7R, Alpha A5000, Alpha A5100, Alpha A6000, Alpha A6300, Alpha A3000, HDR-CX220, HDR-CX230, HDR-CX290, HDR-CX380, HDR-CX430V, HDR-PJ230, HDR-PJ380, HDR-PJ430V, HDR-PJ650V, HDR-PJ790V
Sony camera’s, up until the 2020’s, had a proprietary version of the USB Micro connector called a Multi connector. It looks like USB Micro but longer. It can be used for charging, shutter release, OR USB tethering. If you want to be able to tether, see our SnapTether cable.







