SlideSnap Strip FilmStage Rebuild Service


To remedy / prevent any film feeding mechanical issues. Our rebuild service involves a complete strip down of the film stage to re-establish proper screw torque, belt tension and lubrication to ensure continued trouble-free operation. Worn belts / bearings will be replaced. Control panel firmware will also be updated if available.
To remove the stage, remove the sensor assembly (and the plastic outfeed on the opposite side in the same manner) as outlined in this video.
Then simply disconnect all cables running to the control panel and slide the stage out.
This of course makes shipping simpler for you, however if you would prefer you can send in the entire unit. If shipping the entire scanner, please pack the unit very carefully in a quality box. It should have at least 2” of void fill in all directions and not be allowed to shift.

Unit Details

Weight 5 lbs
Dimensions 8 × 8 × 4 in